دانلود نرم افزار
PassMark BurnInTest Professional 5.3.1026 (Keygen)
-پشتیبانی آن لاین و کتابچه ی راهنمای (به صورت pdf)
-پشتیبانی برای پرینت گرفتن از نتایج تست دستگاهتان
-واقعه نگاری از نتایج در داخل قسمتی که انتخاب شده است ( به صورت ASCII یا HTML )
-ذخیره شماره سریال قسمت تست شده بر روی کارنامه
-خروجی های متفاوت برای کارنامه صادر شده به صورت word یا عکس
-قابلیت ذخیره نتایج به صورت کارنامه ای
-نشاندادن کارایی قسمت تست شده، به وسیله ی تعیین یک سری وظیفه برای هر تست
-نشاندادن و شمردن میزان کارایی قسمتهای تست شده
-ساده در استفاده با چند کلیک
-قابلیت اجرا از روی سی دی یا usb (در محیط ویندوز)
-مشخص کردن اطلاعات سیستم شامل : نوع و شماره سریال و سرعت cpu
-نشان دهنده ی میزان حرارت(به همراه Intel Active Monitor, HMonitor, MotherBoardMonitor and SpeedFan software)
-نمایش باتری رایانه های قابل حمل(with additional BatteryMon software)
-تست ram با بیشتر از ۴GB ظرفیت برای ویندوز ۲۰۰۰/xp/vista
-تست پرینتر به صورت رنگی یا سیاه سفید
-تست کارت صدا با فایهای mp3, wav و midi
-تست هارد درایو و فلاپی تا بیش از ۲۰ مورد به صورت همزمان
-تست ۲۰ cd/dvd به صورت همزمان
-تست خاموش کردن ویندوز و reboot
-تست video ram
-پشتیبانی از SMART hard disk parameter
و چندین کار متنوع دیگر که در اطمینان حاصل کردن شما از سلامتی دستگاهتان بسیار موثر می باشد.
پس با خیال راحت دانلود کرده و بر روی دستگاهتان اجرا نمایید.
Product Description:

PC Reliability and Load Testing for Windows

PassMark BurnInTest is a software tool that allows all the major sub-systems of a computer to be simultaneously stress tested for endurance, reliability and stability.

– Assists in PC Troubleshooting and diagnostics.
– The best value professional burn-in tool on the market!
– Avoid delivering D.O.A. (Dead on Arrival) hardware to your customers.
– Dramatically reduce your burn in times with multithreaded simultaneous testing of components.
– Build your image as a supplier of quality systems.
– Avoid costly downtime, system rebuilds and lost data.
– Test the stability of a system after configuration changes or hardware upgrades (critical for overclocking).

Anyone who has used computers for any period of time will understand the importance of having a stable system. The cost of a hardware failure can be enormous. If you are lucky your data will only become inaccessible while faulty components are replaced. If you’re unlucky you can lose your files completely or have them permanently corrupted. Even if you have good backups, you can still lose days of work returning the PC to its pre-failure state. In many cases the lost data can never be replaced and businesses can be brought to their knees, with the loss of documentation, customer details and financial records.

What BurnInTest does is thoroughly exercise the hardware in a PC in a short period of time, in the same way as normal applications use a PC over a long period of time. This takes advantage of the fact that computer hardware tends to fail either very early in its life or after many thousands of hours of use. Typically BurnInTest should be used before a PC is put into service, as the failure of a computer that isn’t being used for a critical application and doesn’t have any critical data is much less damaging, (especially if it is still under warranty).

BurnInTest will bring intermittent or hidden problems to the surface so that after a successfully run the computer can be used with a much higher level of confidence. BurnInTest can also be used by overclockers to verify system stability at high clock speeds.

Difference Between Standard and Professional Editions

The two editions are identical except for the following additional features in the Professional Edition:

– If you have specialized hardware that BurnInTest does not test, you can even write your own tests and integrate them with BurnInTest Professional. PassMark has produced plugin tests for Keyboards, Dial up Modems and FireWire ports.
– Serial port loop back testing. Testing can be performed on up to 64 serial ports at the same time. Loop back plugs are required for this test.
– Parallel port loop back testing. Loop back plugs are required for this test.
– USB port testing using the PassMark USB Loop back plug or the PassMark USB 2.0 Loop back plug. Up to 10 USB ports can be simultaneously tested.
– Tape drive testing under Windows 2000, XP, 2003 and Vista.
– CPU affinity selection, for targeting testing to a single CPU. This can be useful in dual CPU or quad CPU systems.
– Advanced RAM testing with page locking and testing beyond the 4GB barrier in 32-bit Windows 2000, XP and Vista. (up to 64GB)
– Scrolling ‘H’s for Electromagnetic Compliance (EMC) testing to ANSI standard C63.4-1992
– Additional options for video card testing
– Testing on 64-bit (x64) versions of Windows using a native 64-bit version of BurnInTest Professional. The Standard Edition is 32bit only. The Pro edtion is 32bit and native 64bit. When you purchase the 32bit edition of BurnInTest Pro, you get the 64bit edition for free. The same license key works in both packages.
– Running BurnInTest from a CD or USB drive.

Product Homepage:

Code:
http://www.passmark.com/products/bit.htm
Screenshot:



Main Screen



Fully Registered!

Download:

PassMark BurnInTest Professional 5.3.1026

Code:
http://rapidshare.com/files/132752934/PMBITPro531026_by_Tomato.rar

Portable Version
Code:
http://rapidshare.com/files/132753769/PMBITPro531026_Portable_by_Tomato.rar