دانلود نرم افزارهای مرتبط با طراحی پل ها

[M@hdi42]

ز این پس جهت نظم دهی بهتر بخش دانلود نرم افزار و دسترسی بهتر همراه با دسته بندی مناسب آنها نرم افزارهای مرتبط به طراحی پلها در این تاپیک قرار داده میشود
البته قبل از این تاریخ نرم افزارهای دیگری در این زمینه در سایت قرار داده شده است که این تاپیک شامل آنها نخواهد بود. از دوستان نیز تقاضا میشود که نرم افزارهای طراحی پل و مرتبط با طراحی پل را فقط در همین تاپیک برای دانلود معرفی نمایند
برخی از تاپیکهای مرتبط ( و البته نه تمام آنها ) که قبلاً ایجاد شده اند به آدرس های زیر میباشند:

نرم افزار FB-Pier V.3
http://iransaze.com/ftopicp-69767-bridge.html#69767

دانلود نرم افزار طراحی پل ADAPT-ABI v5 Bridge Design
http://iransaze.com/ftopicp-69626.html#69626

دانلود 437 برنامه مهندسی عمران در شاخه های مختلف تحت اکسل ( بخشی شامل نرم افزارهای طراحی پل )
http://iransaze.com/ftopicp-69087.html#69087

دانلود جدید ترین ورژن pca cloumn
http://iransaze.com/ftopicp-69077.html#69077

Midas Civil 2009
http://iransaze.com/ftopicp-56289-bridge.html#56289

دانلود مجموعه متنوعی از نرم افزارهای مهندسی عمران ، معماری و نقشه برداری (بخشی شامل نرم افزارهای طراحی پل )
http://iransaze.com/ftopicp-54601-bridge.html#54601
شامل بخشهای زیر :

RM2004.Space.Frame4D.9.04.02
http://rapidshare.com/files/28007932...-omran.com.rar
RM2004.Space.Frame.9.02.02
http://rapidshare.com/files/28009550...-omran.com.rar
West.Point.Bridge.Designer.2006
http://rapidshare.com/files/28009758...-omran.com.rar
پسورد برای نرم افزاراهای بالا : www.elme-omran.com
دانلود نرم افزار lusas 13.6
http://iransaze.com/ftopicp-10862-bridge.html#10862

Imbsen XTRACT v3.0.3 - Tool for Analysis of Structural Cross Sections
http://iransaze.com/ftopicp-2659-bridge.html#2659

PGSplice v0.6.3
http://iransaze.com/ftopicp-2092-bridge.html#2092

[M@hdi42]

دانلود نرم افزار طراحی پل PENTAGON-Bridge

توضیحات:
PENTAGON-Bridge has comprehensive analysis facilities to design all types of bridge design from simple grillages to complex cable stayed and suspension bridges. PENTAGON-Bridge searches the worst position and the worst combination of loads for specified variables such as moment, shear, stress, support reaction etc at a given location in a bridge deck or a structure using the influence line, the influence surface, the envelope of maximum/minimum values of such variables.

PENTAGON-Bridge has been developed specifically for the bridge analysis based on the powerful 3D finite element technology. PENTAGON-Bridge has its technical foundation on the famous, general-purpose FE program, PENTAGON-3D. PENTAGON-Bridge will meet your analysis needs and reduce your modeling efforts, greatly.

PENTAGON-Bridge covers any of the following special features for the most cost-effective analysis of bridges.

*

Influence line : produces the influence line along the path of moving loads
*

Influence surface : produces the influence contour over the area passed by moving loads
*

Bridge Envelope : produces the maximum and minimum values of the specified parameter (moment, shear, stress, support reaction etc) for all elements.
*

Bridge Target : traces the target load condition to make the specified member forces at a location. For example, this traces the load condition to make the minimum (negative) moment at a internal support of bridge.
*

Eigenvalue problems (see an Arch bridge example)
*

Earthquake spectrum analysis by SRSS and CQC method
*

Ground motion analysis
*

Time history analysis for the dynamic loads
*

Dynamic analysis for the moving loads by simple input of moving velocity and/or (roughness + vehicle model)

Besides the above capabilities, PENTAGON-Bridge extends its application to :

*

Geometric nonlinearity for truss and frame structures
*

Material nonlinearity for truss, spring and solid elements
*

Staged construction
*

Solid modeling for ground-structure interaction
*

Stop and restart function
*

Result combination between the load cases, the load stages, the bridge envelopes and the bridge targets

PENTAGON-Bridge is the Windows based program on Windows 95, Windows 98, Windows NT and Windows2000. The mesh generation is easily accomplished by several mouse clicks and other analysis information is input in full GUI environment. With the powerful OpenGL functions (the graphic library), the analysis results are presented in the beautiful 3D graphics.

لینک دانلود:
در صفحه مورد نظر هم خود برنامه و هم منوال و مثال های طراحی را دانلود کنید
http://www.femsoft.com/daeyjung/frpen/downpbr.html

[M@hdi42]

دانلود نرم افزار FB-MultiPier v3

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

توضیحات:
The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans. The full structure can be subject to a full array AASHTO load types in a static analysis or time varying load functions in a dynamic analysis. Each pier structure is composed of pier columns and cap supported on a pile cap and piles/shafts with nonlinear soil. This analysis program couples nonlinear structural finite element analysis with nonlinear static soil models for axial, lateral and torsional soil behavior to provide a robust system of analysis for coupled bridge pier structures and foundation systems. FB-MultiPier performs the generation of the finite element model internally given the geometric definition of the structure and foundation system as input graphically by the designer. This allows the engineer to work directly with the design parameters and lessens the bookkeeping necessary to create and interpret a model.

لینک دانلود:
http://www.4shared.com/file/5oAfgA1D/PIER.htm

[M@hdi42]

---

TDV RM 2004
منبع
و
http://forum.civilea.com/Thread-tdv-rm-2004
نرم افزار طراحی پل

سایت شرکت سازنده http://www.tdv-consulting.at/index.php

لینک دانلود:
http://www.4shared.com/file/14904276..._V9-11503.html
http://hotfile.com/dl/133080524/a8b0...11503.zip.html
TDV RM 2006

Size: 171 MB

TDV RM 2006 install files only!
http://www.4shared.com/account/file/...200695901.html

مراحل نصب:
1) run setup.exe 0n folder : TDV_RM2004 V9.15.03 to install

2) after install, go to cracck folder, copy "gp9.exe" and "rm9.exe" from "\LEGEND"
dir into C;/Program files/Tdv2000/rm9.15.03, overwrite when prompted

3) go to folder : Basewin V2.15.01 and run setup.exe

[M@hdi42]

---

PGSuper v2.0.2
منبع

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

Win | English | .rar | 20 mb

PGSuper™ is Precast-Prestressed Girder design and analysis software. PGSuper™ can be used to design and check precast-prestressed girder bridges in accordance with the AASHTO LRFD Bridge Design Specification and/or WSDOT criteria. The flexural design feature computes the number and configuration of prestressing strands and the minimum required concrete release strength. The shear design feature determines the number, size, and spacing of transverse reinforcement for vertical shear, horizontal shear, bursting, and strand confinement. Specification checking evaluates girders for compliance with strength, service, and detailing criteria. Girders are evaluated for stresses and stability during handling and transportation. Temporary prestressing to control camber, improve stability, and reduce concrete release strengths may also be input. The capabilities and constraints of local fabricators have been accounted for in this software product. PGSuper™ has been designed to allow for future expansion and updating as design criteria and user expectations change.

لینک دانلود:
http://rapidshare.com/files/60047288....0.2.part1.rar
http://rapidshare.com/files/60052876....0.2.part2.rar
http://rapidshare.com/files/60061928....0.2.part3.rar
http://rapidshare.com/files/60066619....0.2.part4.rar
http://rapidshare.com/files/60070681....0.2.part5.rar

[M@hdi42]

---

برنامه طراحی پل Sam Leap 5
منبع
و
http://forum.civilea.com/Thread-sam-leap-5

SAM-LEAP5's section design modules allow you to define sections of any shape,
apply moments, axial forces and shears and then determine the section properties,
stresses and strains.

SAM-LEAP5's beam design modules allow you to define and design steel concrete
composite beams, precast prestressed beams, reinforced concrete beams
and post-tensioned concrete beams.

SAM-LEAP5's analysis modules model a wide range of bridge structures from line beams,
through offset grillages to plate finite element models.
Integration with the section and beam modules leads to a very rapid design cycle.

لینک دانلود:
http://rapidshare.com/files/307573749/SamL5.part1.rar
http://rapidshare.com/files/307063050/SamL5.part2.rar
Mirror with crack
http://hotfile.com/dl/132992843/e3d4...part1.rar.html
http://hotfile.com/dl/132992852/b3d7...part2.rar.html

[M@hdi42]

---

نرم افزار UT Bridge
Analysis of bridge erection and concrete deck placement

PURPOSE: UT Bridge is a PC based user-friendly 3-D finite element analysis program that analyzes straight or curved I-girder bridges during girder erection and concrete deck placement. The program uses information readily available to the practicing engineer and develops a robust model to predict the behavior of these bridges providing the user with displacements, stresses, and rotations.

لینک دانلود:
http://www.4shared.com/file/gSghsQ5F/UT_Bridge.html
منبع

[M@hdi42]

---

Csi Bridge V15
http://forum.civilea.com/showthread....52122#pid52122
Here CSI Bridge without med
http://www.fileserve.com/list/ZZZW92N
CSiBridgeV1500StandAlone.zip.001 100.00 MB
CSiBridgeV1500StandAlone.zip.002 100.00 MB
CSiBridgeV1500StandAlone.zip.003 100.00 MB
CSiBridgeV1500StandAlone.zip.004 100.00 MB
CSiBridgeV1500StandAlone.zip.005 100.00 MB
CSiBridgeV1500StandAlone.zip.006 23.39 MB
Total file size: 523.39 MB
Significant enhancements included in CSiBridge v15.0.1:

* A new option has been added for the modeling of I-girders in composite steel-girder superstructure sections. In addition to the existing options to model the I-girders as frame objects or as area objects (for both web and flanges), the girders can now be modeled using area objects for the webs and frame objects for the flanges.

* A new bridge seismic design check has been added to the Chinese version that follows the Chinese code JTG/T B02-01-2008, "Guidelines for Seismic Design of Highway Bridges".

* Bridge design for prestressed concrete box girder superstructures using Chinese code “JTG-D62-2004” in the Chinese version has been updated as follows: (1) The effect of existing longitudinal rebar is now accounted for in flexural design. (2) A new design check has been added for tendon stress.

* The Chinese 2002 building design codes are available for concrete and steel frame design in the Chinese version.

* Concrete frame design has been enhanced to improve the smoothing of P-M-M interaction surfaces in those rare cases where they become non-convex due to kinks in the P-M curves.
Mirror link for SapBridge V15
http://www.mediafire.com/?fgyq8drzgdawo
Size: 523,79 MB
miror links
megaupload

http://www.megaupload.com/?d=C0B1UN5S

depositefiles

http://depositfiles.com/en/files/ftqndg095

direct from multiupload

http://www.multiupload.com/ZEGU3C5FLS
اطلاعات بيشتر در مورد نرم افزار :
http://iransaze.com/ftopicp-96879.html#96879

[M@hdi42]

---

WinSEISAB v5.0.7 (Seismic Analysis of Bridges)
http://forum.civilea.com/showthread....55464#pid55464
Program Overview

WinSEISAB (Windows SEISmic Analysis of Bridges) is a computer program specifically developed for the seismic analysis of bridges. The overall objectives in developing WinSEISAB were to provide the practicing bridge engineer with a usable design tool and a vehicle for implementing the latest seismic design methodologies into the bridge engineering profession.

WinSEISAB contains the Uniform Load (AASHTO Procedure 1), the Single Mode Spectral Analysis (AASHTO Procedure 2) and Multimode, i.e., response spectrum, Spectral Analysis (AASHTO Procedure 3) methods included in the current AASHTO Standard Specifications for Highway Bridges, Division IA [1], which adopted the “Guide Specifications for Seismic Design of Highway Bridges” [10] in 1990. The Guide Specifications are based on the ATC report: “Seismic Design Guidelines for Highway Bridges” [2]. Consequently, the AASHTO response spectra used in WinSEISAB correspond to those that were previously identified as ‘ATC-6.’

WinSEISAB can be used to analyze simply supported or continuous deck girder-type bridges with no practical limitation on the number of spans or the number of columns at a bent. In addition, earthquake restrainer units may be placed between adjacent structural segments. Horizontal alignments composed of a combination of tangent and curved segments are easily described using alignment data taken directly from roadway plans. Connections between the superstructure and the substructure and between adjacent superstructure segments at span hinges can be specified with either a keyword force release or by using bearing elements on a point-by-point basis. The flexibility of the soil and foundations at the abutments and column bottoms is easily included using stiffness coefficients or individual piles grouped into pile footings.

WinSEISAB has generating capabilities that will, with a minimum amount of input data, automatically build a model consistent with the modeling techniques currently being used to conduct dynamic analyses. Seismic loadings in the form of acceleration response spectra are stored within WinSEISAB and may be easily referenced by the user, or a site-specific spectrum can be utilized. WinSEISAB can perform a static analysis in which dead load forces are generated using structure mass, but WinSEISAB does not perform a combination of dead load and seismic forces.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://www.mediafire.com/file/ubsz00...isab_5_0_7.rar
http://www.duckload.com/download/303...ISAB_5.0.7.rar
http://www.filesonic.com/file/101401...isab_5_0_7.rar
http://www.fileserve.com/file/T7QjCj...isab_5_0_7.rar
http://www.shragle.com/files/39fc778...isab_5_0_7.rar
http://uploading.com/files/fb4e66a1/...SAB_5.0.7.rar/
http://ifile.it/rv9blx4/winseisab_5_0_7.rar
4shared|depostefiles|hotfile|rapidshare|filefactor y|uploaded.to:
http://www.interupload.com/files/1O1..._0_7.rar_links

[M@hdi42]

---

Imbsen Winbds
http://forum.civilea.com/showthread....55661#pid55661
WinBDS analyzes or designs orthogonal bridge frames and is applicable to the majority of concrete bridges being designed today.

CROSS SECTIONS may by specified by using a predefined, standard box girder superstructure shape or by adding or subtracting geometrical parts using predefined part codes.

LIVE LOADS can be automatically generated for the AASHTO HS20-44 and the California P13 truck by simply giving the number of live loads lanes may be applied to the structure by describing the axle loads, distance between axles and number of live load lanes. Uniform lane loads can be defined with moment and shear riders. Other automatically generated live loads include the Cooper Loading and a user defined vehicle of up to 97 axles.

PRESTRESSED CONCRETE analysis and design capabilities include: Continuous prestress, Simple span prestress, Segmental prestress, 100 prestress cable paths per frame, 3D cable friction losses, Primary and Secondary effects, Cross-section analysis, Ultimate capacity check, AASHTO shear requirements, Tendon elongations, and calculation of AASHTO long-term losses.

OUTPUT results are organized in the same order as the input data. All input data is echoed in the output reports. Output reports include section properties, dead load and additional fixed loads results, live load force envelopes, prestress results including required P-Jack, mild steel requirements, and shear design stirrup requirements. Additional reports are generated for the Rating Subsystem and Prestresed Precast Girder Subsystem.

GRAPHICAL DISPLAY of moment and shear envelopes are available after an analysis has been performed. Additional plots are available for deflections, top and bottom fiber stresses, prestress force, prestress cable path and influence lines. These plots can be displayed for all spans in the bridge or for an individual span or for any sequential list of spans. Where applicable, the plots include the different trials that are available, such as: dead load, added dead load, live load no. 1 (both negative and positive envelopes), prestress, etc. These loads can be plotted individually or combined into one load case.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://www.4shared.com/file/kRuQ_tx5/wnbds.html
password:
_always4civilEa_
Mirror Links:
RAR 11.50 MB
http://www.duckload.com/download/313...nBDS_5.0.3.rar
http://www.filesonic.com/file/108405...nBDS_5.0.3.rar
http://www.fileserve.com/file/ftYtuRH/WinBDS_5.0.3.rar
http://www.shragle.com/files/b444ac06/WinBDS_5.0.3.rar
http://uploading.com/files/6m22mmde/WinBDS_5.0.3.rar/
http://ifile.it/3wtjlcb/WinBDS_5.0.3.rar
4shared|depostefiles|hotfile|rapidshare|easy-share|filefactory|uploaded.to:
http://www.interupload.com/files/10K....0.3.rar_links
Installation notes: Copy file "iai.key" into WinBDS folder.