دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک

[M@hdi42]

---

MGeobase v2.9.4.3
http://forum.civilea.com/Thread-mgeobase-v2-9-4-3
Size: 11.1 MB

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

MGeobase is the time-saving and user-friendly working environment for the MSeries.
MGeobase stores project-based field data and soil parameters, and contains
several power tools to interpret the field data and create soil profiles. All important
M-Series programs can directly access the centrally stored data. MGeobase
connects easily to company databases. The unique batch engine enables the highly
efficient analysis and visualization of large series of cross-sections, and is
especially applicable for the stability and settlements of embankments.
GeoDelft has been developing MGeobase since 1999. See the Introduction
[Chapter 1] for more information about MGeobase.
History
• Release 1.0 (1999) is the first MGeobase version, with storage of CPT data,
2D geometries and soil parameters in a local database (Paradox).
• Release 2.0 (2001) contains an improved user interface for geometry
definition.
• Release 2.7 (2003) uses a new database technology (Interbase), with improved
performance and additional database server support. A new module contains
models for automatic CPT interpretation and easy 1D geometry creation, with
automatic conversion to 2D cross-section geometry.
• Release 2.9 (2004) includes a completely new GIS-based user interface and
major new functionality for CPT interpretation and the construction of
geotechnical profiles. The new batch engine module enables the efficient
analysis and visualization of large series of cross-sections by the M-Series
programs for stability and settlement analysis.


First open the medicine file and then read the instructions given in the tbe.nfo
www.deltaressystems.com
http://hotfile.com/dl/114844129/7200...gbase.rar.html
medicine included
پسورد :
*CivilEA_is_best*

[M@hdi42]

---

ENSOFT GROUP v8.0
http://forum.civilea.com/Thread-ensoft-group-8
Size: 38.6 MB


GROUP has been well accepted as an useful design tool for analyzing the behavior of piles in a group subjected to both axial and lateral loadings. The program was developed to compute the distribution of loads (vertical, lateral, and overturning moment in up to three orthogonal axes) applied from any multiple locations in the pile cap to piles arranged in a group. The piles may be installed vertically or on a batter and their heads may be fixed, pinned, or elastically restrained by the pile cap. The pile cap may settle, translate, and/or rotate and is assumed to act as a rigid body.

The program will generate internally the nonlinear response of the soil, in the form of t-z and q-w curves for axial loading, in the form of p-y curves for lateral loading and in the form of t-r curves for torsional loading. A solution requires iteration to accommodate the nonlinear response of each pile in the group model. Program GROUP solves the nonlinear response of each pile under combined loadings and assures compatibility of geometry and equilibrium of forces between the applied external loads and the reactions of each pile head.

The p-y, t-z, q-w and t-r curves may be generated internally, employing recommendations in technical literature, or may be entered manually by the user. The pile-head forces and movements are introduced into equations that yield the behavior of the pile group in a global coordinate system. The program can internally compute the deflection, bending moment, shear, and soil resistance as a function of depth for each pile.

For closely-spaced piles, the pile-soil-pile interaction can be taken into account by introducing reduction factors for the p-y curves used for each single pile. As an option, the user can ask the program to generate internally some suggestions for p-multipliers to automatically reduce the soil resistance. GROUP is able to generate or lets users specify p-y reduction factors for two orthogonal axes.

The program allows the user to select computations of the required unit side friction at the top and bottom of each soil layer along with a unit tip resistance. The program employs commonly-accepted equations to compute internally the estimated unit side friction and unit tip resistance based on the soil properties that are specified by the user for each soil layer.

Users can also input external nonlinear curves of axial load versus settlement for each pile in the group. Those external curves can be obtained by the user based on load tests or using the Ensoft programs APILE and/or SHAFT.

GROUP v8.0 introduces several enhancements: Use of multiple load cases representing concentrated loads at the pile cap and/or distributed lateral load at the piles; Concentrated loads at the pile cap may be defined at any position; Distributed lateral loads at the piles can be defined by local or global axes; Load combinations can be specified by the user and are set by load factors applied at the defined load cases; Maximum and mini-mum envelopes may be computed for both load cases and load combinations; GROUP v8 can provide flexibility and stiffness matrices (in 2D or 3D models) for different levels of loading.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://www.ensoftinc.com/
http://www.megaupload.com/?d=I61LV4KP
MEDICINE NEEDED
Med for Ensoft Group v8.0.4:
http://www.4shared.com/file/d-jD87Q4/Gv804.html
پسورد :
CivilEA+
لینک کمکی :
http://rapidshare.com/files/444862825/EG_8.rar
پسورد :
civilEA
Ensoft Group v8.0.4 + Medicine

Size: 40,388 KB
لینک کمکی :
http://www.mediafire.com/?0026wlrlxww568s

http://www.4shared.com/file/XHtP1Kdg...4_CivilEA.html

http://ifile.it/eod1gmq/EnsGrpv804_CivilEA_.zip

http://www.sendspace.com/file/24lkvw

http://www.filefactory.com/file/b52f...4_CivilEA_.zip

http://depositfiles.com/pt/files/72tvbwtlb

http://rapidshare.com/#!download|882l32|444882851|EnsGrpv804_CivilEA_.zip |41356

http://hotfile.com/dl/99985693/4c06c...ilEA_.zip.html

پسورد :
CivilEA+
Ensoft Group 8.0.8

Size: 40.49 MB
لینک کمکی :
http://rapidshare.com/files/456892770/gp8-32s_8.0.8.exe
NEED MEDICINE
Size: 40 MB
Ensoft Group V 8.0.9 release 14/4/2011

Maybe our colegue struceng can make the medicine for V8.0.4 to work for V8.0.9
لینک کمکی :
https://rapidshare.com/files/4574379...32s_V8.0.9.exe
NEED MEDICINE
Med for Ensoft Group v8.0.9:
http://www.4shared.com/file/-qT3luB6/G8v809.html

Password:
CivilEA++

Ensoft Group V 8.12

Size: 40.49 MB
http://www.ensoftinc.com/
https://rapidshare.com/files/7008448...-32s_V8.12.exe
NEED MEDICINE
a new version has been released GROUP V8.0.13.

Maybe struceng can make a new crack for this version. Thank you
https://rapidshare.com/files/7090278...s_V8.0.13_.exe

[M@hdi42]

---

Geodelft Mdrill_v4.1.2.3
http://forum.civilea.com/Thread-geodelft-mdrill-v4-1
Size: 20.3 MB

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

This is MDrill version 4.0. MDrill is a dedicated tool for designing pipelines constructed using the horizontal directional drilling technique (HDD). GeoDelft has been developing MDrill since 1992.
History
The first successful pipeline installation using the HDD technique was carried out under a river in the US. From 1979 onwards, the HDD technique gradually broke through internationally. The first application in The Netherlands was in 1983/1984 for the construction of a gas pipeline under the Buiten IJ in Amsterdam. Unlike conventional construction methods, the HDD technique can be used to construct pipelines without digging trenches and pits – for example, using sag pipes, pipe jacking or microtunneling. And it also significantly shortens the construction time. After the first application of the HDD technique, the NV Nederlandse Gasunie (Dutch Gas Corporation) took the initiative to form a research team to investigate the new construction technique. GeoDelft was a member of that research team, which investigated the construction of two pilot projects in the Netherlands.
The two pilot horizontal directional drillings were carried out in 1985. While the pipeline was being installed, measurements were taken to gain a greater understanding of the behaviour of the soil around the borehole. The results of the research were used to define preliminary guidelines that must be taken into account when designing and constructing pipelines using the HDD method. Since the first pilot projects, a large number of HDD’s have been carried out, and the HDD technique has become a quick and reliable method for constructing cables and pipelines under waterways and other objects. Continuation of the research has led to a greater store of knowledge about soil behaviour, the stresses in the pipes, and the fluid pressures in the borehole. The MDrill computer program was developed on the basis of this knowledge. Version 1.0 was first released in 1995. Some new features, such as the option for performing a strength calculation, were added in 1998. Version 4.0 includes an adapted calculation of maximum allowable mud pressures and an adjusted strength calculation according to the NEN 3650 series.

Just read the instructions given in the tbe.nfo file located at medicine folder
http://www.deltaressystems.com/geo/products
http://www.4shared.com/file/7Yes2emf/geodlft_mdrll.html
medicine included
password:

کد:

*always_civilEA*

[M@hdi42]

---

QuickRWall v2.1.7
http://forum.civilea.com/Thread-quic...62012#pid62012
Analysis of retaining walls.

For more information:
www.iesweb.com

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

Setup+Med:
http://www.4shared.com/file/r3O_6wdM/qrwv217.html

Password:
CivilEA++

[M@hdi42]

---

Elpla GEOTEC Office Professional Edition v9.2.0. Service Pack 1.0
http://forum.civilea.com/Thread-elpl...ice-profession
GEOTEC Office, A package for geotechnical and design engineering
ELPLA Analysis and Design Slab/ Mat foundation
(Manage and analyze soil models.)


Size: 130.19 MB

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

offers users a professional and useful package for geotechnical and design engineering
GEOTEC Office is a package for geotechnical and design engineering. The package contains the following programs and tools:

- ELPLA (ELASTIC PLATE): Analyzing footings, rafts, piled rafts, pile groups and foundation groups. ELPLA considers different soil models, especially the three dimensional continuum model that takes into account any number of irregular layers. The program is able to handle the three solutions of flexible, elastic and rigid foundations. ELPLA can also be used to represent the effect of external loads, neighboring foundations, tunneling and the influence of temperature change on the raft.

is a program for analyzing raft foundations of arbitrary shape with the real subsoil model. The mathematical solution of the raft is based on the finite element method. The program can analyze different types of subsoil models, especially the three-dimensional Continuum model that considers any number of irregular layers. A good advantage of this program is the capability to handle the three analyses of flexible, elastic and rigid foundations. In addition, the mesh of the rigid and flexible foundations can be constructed to be analogous to the finite elements mesh of the elastic foundation. Therefore, the three analyses can be compared easily and correctly. ELPLA can also be used to represent the effect of external loads, neighboring foundations, tunneling and the influence of the temperature difference on the raf

The program package ELPLA consists of 7 separate programs. The seven separate programs can be run independently. The names and short descriptions of the seven separate programs are:

• ELPLA-Boring: Editing and displaying of boring layers
• ELPLA-Data: Editing the Project data
• ELPLA-Graphic: Displaying data and results graphically
• ELPLA-List: Listing the project data and calculated results
• ELPLA-Section: Displaying results graphically at specified sections
• ELPLA-Solver: Analyzing the project problem
• GEOTEC: Simple word processing program

- BOHR: Drawing borehole logging of soil layers by different symbols according to the German specification code DIN 4023.
The program is used to draw the soil layers by different symbols according to the German specification code DIN 4023.

- TIEF: Analyzing single piles, pile walls, simple problems of pile groups and rigid piled rafts.
The program is used to solve the following pile problems:
1- Analysis of single pile
2- Bearing capacity and settlement of single pile or pile wall
3- Analysis of piled raft
4- Stress coefficients according to GEDDES

- GeoTools: Analyzing different problems in geotechnical engineering.
The program is used to solve the following problems in geotechnical engineering:
1- Stresses in soil
2- Strains in soil
3- Displacements in soil
4- Consolidation settlement
5- Degree of consolidation
6- Time-settlement curve
7- Displacement of rigid raft
8- Consolidation of rigid raft

- Self-Adaptive Mesh Wizard: Generating finite element mesh with better element / node distributions.
The Self-Adaptive Mesh Wizard is a tool that helps the user for generating finite element mesh with better element/ node distributions. The wizard is used to regenerate the finite element mesh for slab floor and raft problems. The new mesh will be generated based on the strain energy distribution. The self-adaptive technique used in this wizard reduces general system error besides enhances stress distributions. Adaptive mesh is generated either by using Delaunay generation or by using Grid-based generation.

- GEOTEC-Text Editor: A simple word processing program for editing GEOTEC Office output.
The GEOTEC-Text is a simple word processing program. The project data or results can be displayed, changed or printed through the GEOTEC-Text


Developer: Elpla © 2009
Release date: feb.01.2008
New Service Pack1. Includes support for Windows Vista/Seven
OS: Microsoft Windows 95/NT/2000/XP/Vista/Seven
Languages Interfaz: English, German, Arabic

http://www.elpla.com/elpla_en/prg_elpla.htm

http://www.mediafire.com/file/h6163g...v9.2.0.SP1.rar
present: update version professional
password:
www.CiviLEA.com-2011105

mirrors:
Size: 130.19 MB
http://www.4shared.com/file/inTpS1Ns...nalEditio.html

http://hotfile.com/dl/116120152/b9c0...0.SP1.rar.html

http://ifile.it/5ozhn92/EOTEC.Office...v9.2.0.SP1.rar

https://rapidshare.com/#!download|74dt|459675535|EOTEC.Office.Professional .Edition.v9.2.0.SP1.rar|136510|R~0

http://www.easy-share.com/1915011664...v9.2.0.SP1.rar

http://depositfiles.com/pt/files/pg07bcjks

password :
www.CiviLEA.com-2011105



ELPLA Professional Edition v9.2.0.SP1

Size: 129.56 MB

Notes:
a) this is a lone installer package "Elpla GEOTEC Office Professional Edition V9.2.0. Service Pack 1.0", which contains the same medicine (installed first version" ELPLA LE v9.1.0 "and then the update ..

b) in "Elpla GEOTEC Office Professional" To apply the update and does not generate any error must close the application that is displayed by an icon in the lower right side of the Windows desktop...

http://www.mediafire.com/file/5xi1tm...v9.2.0.SP1.rar
پسورد :
www.CiviLEA.com-2011105

[M@hdi42]

---

GGU Gabion v2.11 - Calculation of Gabion Walls
http://forum.civilea.com/Thread-ggu-gabion-v2-11

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

info:
4 MB Compressed RAR File | OS: Windows ALL

The GGU-GABION program system allows the calculation and design of gabion walls and walls build by similar stackable elements.


The program system allows comfortable data input. The system is displayed on the screen. Every change in data is shown on the screen, so that optimum control of input data is guaranteed. A variety of graphical presentation possibilities, to a high standard of quality, allow you to present the calculation results according to your wishes.

The working group 5.9.3 of the FGSV (Forschungsgesellschaft für Straßen und Verkehrswesen - German Research Group for Road and Traffic Systems) has developed a paper for the calculation of gabions. This paper represents the main basis for programming.

The program was developed in early 1999, in part from previously existing program modules.

Capabilities
The GGU-GABION program has the following special capabilities (and maximum values):
Almost any kind of definition of gabion bodies
Base inclination of the gabion body
50 soil layers
5 benches on the active side
5 benches on the passive side
Calculations with active, increased active and at-rest earth pressure
Active earth pressure coefficients, MOHR / COULOMB and user-defined values
Passive earth pressure coefficients, MOHR / COULOMB, STRECK / WEIßENBACH, CAQUOT / KERISEl and user-defined values
Calculation of settlements
Calculation of external stability
Verification of inner stability along the lines
Comfortable interface to the slope stability program GGU-STABILITY for fast investigations of terrain stability
50 surcharge earth pressure figures
20 block loads at any depth
Static calculations of the wall via a two-dimensional rod structure program module on the basis of finite-element methods.
Definition of up to 10 additional path boundary conditions (torsion, displacement for x and y) at any position.
Definition of up to 10 additional force boundary conditions (moment, cross force and normal force) at any position.




Download Links:
http://www.megaupload.com/?d=HY8REX5H
Mirror Links:
RAR 3.37 MB
http://jumbofiles.com/ov5ssdumnavj/G...nv211.rar.html
http://www.filesonic.com/file/871716...Gabionv211.rar
http://www.fileserve.com/file/kuyZJH...Gabionv211.rar
http://rapidshare.com/files/45972176...Gabionv211.rar
http://www.4shared.com/file/a42Dnc7A...abionv211.html
http://uploading.com/files/8f81edcc/GGU-Gabionv211.rar/
http://ifile.it/4f30s5z/GGU-Gabionv211.rar
http://www.bufiles.com/rz415ww6hrlv.html
RAR password: KCivilEA

[M@hdi42]

---

RockWare RockWorks 15 2011.4.18
http://forum.civilea.com/Thread-rock...62534#pid62534
Size: 55.43 MB

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

RockWorks is a great tool for geotechnical and civil engineers to use when evaluating construction and excavation sites. Whether you're in the beginning, middle or ending phase of a project, you'll find that RockWorks will save you and your clients both time and money.

RockWorks features applicable to the geotechnical industry.
The Borehole Manager allows you to bring soil boring, sampling, well screening and other information into the program via a simple Excel or ASCII file import.

View your downhole sampling information in 2D and 3D using a variety of methods and color schemes.

Create 2D and 3D contour maps of stratigraphic surfaces and isopachs. A variety of gridding methods are available.

Create sections showing modeled lithology and stratigraphy.

Generate solid models and volumetric estimations of stratigraphy, lithology, and other downhole parameters.

Create maps showing lithology and stratigraphy at different levels.

Easily estimate excavation volumetrics.

Easily import LogPlot data.

Float or drape airphotos over your 3D logs, solids, and surfaces.
http://www.filesonic.co.il/file/925862224

[M@hdi42]

---

Z_Soil.PC v2010 10.12 (Demo only)
http://forum.civilea.com/Thread-z-so...62729#pid62729
Z_SOIL.PC: A Windows-based tool offering a unified approach to numerical simulation of soil, rock and structural mechanics, above and underground structures, excavations, soil-structure interaction, underground flow, structural pushover and dynamic time integration analysis, and thermal analysis. Z_SOIL.PC is a continuously upgraded engineering software based on the finite-element method. The program has been used with great success in forensic analysis and design studies, covering without exception all possible scenarios encountered in the real world.


The x86 and x64 demo versions and a student version are available.
You must download and install the Intel Math Kernel Library for the version you want to install.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://www.zsoil.info/

[M@hdi42]

---

Geodelft Watex v3.1.2.1
http://forum.civilea.com/Thread-geodelft-watex-v3-1-2
Size: 15.4 MB
Stability and erosion are key phenomena in the design of dike structures. The pore pressure pattern is crucial. Therefore, a reliable prediction tool is required to assess the pore pressure behaviour.
If the geometry and soil data are known in detail, sophisticated numerical tools may be applied. In practice, these data are determined in a few locations only, supplemented with data from global databases. Then, outlined analytical methods are preferred.
Watex is such a simple, but powerful tool. It consists of transient analytical solutions, put together by the conditions of continuity of head and discharge. The user specifies a number of locations, where the pore pressure response is required. The results are visualized in charts.
The input and output for a calculation model of Watex are all done in one window. The various parts of the input and output are available in tabbed pages in this window For now only one model is implemented in Watex: the Sections model.
Section Model
In the Sections model the geometry contains a few essential areas. Four different sections are distinguished:
o riverbed: contains the transient river level
o foreland: represents the flooding of the wetlands
o hinterland: the area direct behind the dike
o far hinterland: the effect of the far away area
For this model the input is split up in the following sections:
- Soil parameters
- Locations and gradient
- Boundary conditions
The results are presented as:
- Report containing the input and the calculation results
- Plot of the head versus time
- Plot of the head versus location


-just apply the instruction given in the tbe.nfo file at the medicine folder
www.deltaressystems.com
http://www.4shared.com/file/ZYAjftTO/gdlft_wtx.html
medicine included
password:
Always_4_CivilEA

[M@hdi42]

---

Afes 3.0 08.07.2009
http://forum.civilea.com/Thread-afes...d=6065#pid6065
info:
This program provides the ability to obtain results of the conventional and finite element method for foundation design and analysis.


Various features to achieve maximum efficiency with minimum effort are include as follow;
One project can handle multiple footing types.
Supprots multiple unit systems for input and output. Can design various foundation modules.
Creates footing geometry, load case and combination data through manual input or automatic import from ad structural analysis program.
Supports soil and pile foundation with any unsymmetrical pile pattern.
Automatic load calculation of wind and seismic factors for heat exchanger, column and tank.
Extensive reporting functions included. These can be customized according to client requirements.
Stress diagram for shear and moment along the user defined strips included.
On-screen report generation with textual and graphicdal results.
Supports automatic design of footing.


Application Area

Equipment Structure, Pipe rack, Derrick Structure
Horizontal Vessel, Horizontal Drum, Heat Exchanger
Vertical Vessel, Vertical Drum, Small Tank, Large Storage Tank
Stack Large Storage Tank, Ball Tank, Transmission Tower
Heater Foundation

screenshots:

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://rapidshare.com/files/26162952...ad.3070809.rar
This version is from 08.07.2009
The last update is from 27.07.2009 and you can download from the Afes site. For me the crack work with the last one.
IMPORTANT NOTICE: You may use this software for evaluation purposes only.
If you like it, it is strongly suggested you buy it to support the developers.
By any means you may not use this software to make money or use it for commercial purpose.
http://rapidshare.com/files/306993660/Afes3.rar
RAR Password: FromCivilEA
Other two Links:
http://hotfile.com/dl/9385106/1eb0d4...70809.rar.html
or
http://www.filefactory.com/file/ahg3...ad_3070809_rar
http://www.gsafes.com/patch/AfesUpda...ck_09_0812.zip
other link:
http://www.4shared.com/file/12700521...k_09_0812.html
Here is the afes update
http://ifile.it/vlnz0c1
you can update it's work good ....
http://www.gsafes.com/patch/AfesUpda...ck_10_1220.zip