پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
توضیحات:
PileWave® was developed by Piletest.com for education and training purposes. It is a simple to use qualitative simulation which lets the user quickly edit a pile shape and view the wave propagation.
PileWave® is protected by copyright lows: You may freely use and distribute PileWave® for private, educational and other non-commercial applications as long as it is not modified in any way. In case of doubt, ask our permission.
لینک دانلود 780 کیلوبایت:
http://www.piletest.com/downloads/PWSetup.exe
منبع
لینک دیگر برای این برنامه:
http://iransaze.com/ftopicp-1721-pilewave.html#1721
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
چند نرم افزار ژئوتکنیکی هم به نقل از سایت دکتر کشاورز :
دانلود برنامههای تحلیل پاسخ زمین:
برنامه DeepSoil برنامهای بسیار خوب برای تحلیل خطی معادل و غیرخطی (پس از ثبت نام می توانید دانلود کنید)
http://illinois.edu/~deepsoil
برنامه تحلیل به روش خطی معادل EERA و تحلیل به روش غیرخطی NERA
http://aminkeshavarz.ir/software/Bardet_EERA_NERA.rar
منبع برای معرفی لینکهای بالا : http://keshavarz.org/modules/content/index.php?id=2
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
چند نرم افزار مناسب برای درس مکانیک خاک که توسط سایت دکتر کشاورز معرفی شده است.
منبع :
http://www.prenhall.com/coduto/html/...l/Software.htm
معرفی لینک :
http://keshavarz.org/modules/content/index.php?id=5
Geotechnical Engineering: Principles and Practices includes the following computer software:
Stress Analysis
STRESSP Geostatic and induced stresses beneath a point load
STRESSL Geostatic and induced stresses beneath a line load
STRESSR Geostatic and induced stresses beneath a rectangular area load
STRESSC Geostatic and induced stresses beneath a circular area load
Settlement
FILLSETT Ultimate consolidation settlement due to weight of a fill
SETTRATE Rate of consolidation settlement due to weight of a fill
Spread Footing Foundations
FOOTING Bearing capacity and settlement of spread footings
This software uses the 32-bit Microsoft Windows operating system (Windows 95, Windows 98, or Windows NT). Additonal system requirements are listed in Appendix C.
This software is available only to owners of the book Geotechnical Engineering: Principles and Practices. It is not freeware, and may not be distributed to others. To install this software, you will need to supply a keyword from the book.
Downloading and Installation Instructions
1. Download the geotechnical analysis software files from the Prentice Hall website by clicking here. Save this self-extracting .zip file to your C: drive.
ftp://ftp.prenhall.com/pub/esm/civil...eotechsoft.exe
2. Double clicking on this file will unzip the files and save them to a new folder, "geotechsoft."
2. Using Windows Explorer, open the "geotechsoft" folder and double-click on setup.exe. The setup routine will then decompress the files and place them in a permanent folder on your hard drive. By default, the files are placed in c:\program files\geotechnical analysis software, but you may choose to place them in some other folder. The setup routine also places an item "Geotechnical Analysis Software" under the Start button - Programs.
3. Click on the Windows Start button, then go to Programs and to Geotechnical Analysis Software. This will start the software. Alternatively, you can use Windows Explorer and double click on c:\program files\geotechnical analysis software\geotechnical analysis software.exe.
4. Delete the "geotechsoft" folder created in Step 2.
5. The first time you run the software, you will be asked to input a keyword from the book. This will complete the installation process. Then follow the instructions on the screen to reach the main menu.
Uninstallation Instructions
To remove the geotechnical analysis software from your computer, click on the Windows Start button, then go to Settings and Control Panel. Once the control panel window appears on the screen, select Add/Remove Programs. Select Geotechnical Analysis Software and click on Add/Remove.
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
این هم چند فایل تحت اکسل مناسب برای درس مهندسی پی پیشرفته معرفی شده توسط سایت دکتر کشاورز :
Bearing Capacity Of Shallow Foundations
Terzaghi and Vesic Methods
ftp://ftp.prenhall.com/pub/esm/civil...ts/Bearing.zip
Settlement Analysis Of Shallow Foundations
Classical Method
ftp://ftp.prenhall.com/pub/esm/civil...Settlement.zip
Stability Of Cantilever Retaining Walls
ftp://ftp.prenhall.com/pub/esm/civil...ts/Retwall.zip
Settlement Analysis Of Shallow Foundations
Schmertmann Method
ftp://ftp.prenhall.com/pub/esm/civil...chmertmann.zip
منبع: http://cwx.prenhall.com/bookbind/pub...e-content.html
معرفی لینک ها :
http://keshavarz.org/modules/content/index.php?id=8
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
چند نرم افزار دیگر که باز هم توسط سایت دکتر کشاورز معرفی شده است:
منبع : http://www.geologismiki.gr/Freeware.html
SteinN
Calculation of immediate settlements under a rectangular footing on cohesionless materials or unsaturated cohesive soils (according to Steinbrenner and Fox).
لینک دانلود : http://www.edrash.gr/Programms/stein_en.rar
ECBear
Simple bearing capacity calculation for rectangular footing on a single soil layer, according to Eurocode 7 1997-1 (2004)
http://www.edrash.gr/Programms/ECBear.zip
GrainMaster
Beta version of our slope stability program. You can download some verification examples here.
http://www.edrash.gr/Programms/pslope.rar
Bearing
Parametric calculation of soil bearing capacity under a rectangular footing, according to EC7 (prEN 1997-1).
http://www.edrash.gr/Programms/bearing.zip
ANN
An implementation of the back-propagation algorithm to train an artificial neural network.
http://www.edrash.gr/Programms/ann.rar
Responsible
http://www.edrash.gr/Programms/responsible.zip
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
چند لینک مفید هم برای آزمایشگاه مکانیک خاک به نقل از سایت دکتر کشاورز :
منبع: http://keshavarz.org/modules/content/index.php?id=4
آزمایشگاه مجازی مکانیک خاک. در این سایت بسیار مفید آزمایشهای مرسوم مکانیک خاک با توضیحات کامل همراه با عکس و فیلمهای کوتاه تشریح شده است. همچنین فرمهایی در این سایت برای هر آزمایش وجود دارد که با پر کردن آنها بصورت آنلاین، نتیجه آزمایش محاسبه خواهد شد.
http://www.cooper.edu/classes/eng/vsoil/
* فایل Excel نوشته شده برای تهیه گزارشات حرفه ای آزمایشگاه مکانیک خاک. فایل شامل 8 شیت است و می توانید گزارشات آزمایشات داده بندی، هیدرومتری، پروکتور و درصد رطوبت را تهیه کنید. برنامه می تواند اندازه الک های میانی را که انجام نشده تخمین بزند، خاک را بر اساس سیستم طبقه بندی متحد ASTM D-2484 طبقه بندی کند، درصد ریزدانه ها، شن و ماسه، ضرایب D10, D30, D60, Cc, Cu را محاسبه کند.
http://www.keshavarz.org/modules/rmdp/down.php?id=21
* دستنامه انجام آزمایشهای مکانیک خاک ناشر: انجمن مهندسین ارتش آمریکا
http://www.keshavarz.org/modules/rmdp/down.php?id=103
* مجموعه برنامه های Excel برای آزمایشگاه مکانیک خاک
http://www.keshavarz.org/modules/rmdp/down.php?id=7
* یک برنامه کوچک و مفید در زمینه دانه بندی خاک (جدید)
http://www.edrash.gr/Programms/grainm.rar
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک
دانلود نرم افزار ITASCA FLAC 2D V5.0.355
http://www.integ.com.tw/itasca/img/f.gif
توضیحات:
FLAC (Fast Lagrangian Analysis of Continua) is a powerful two-dimensional continuum code for modeling soil, rock and structural behavior. Used interactively or in batch mode, FLAC is a general analysis and design tool for geotechnical, civil, and mining engineers that can be applied to a broad range of problems in engineering studies. The explicit finite difference formulation of the code makes FLAC ideally suited for modeling geomechanical problems that consist of several stages, such as sequential excavation, backfilling and loading The formulation can accommodate large displacements and strains and non- linear material behavior, even if yield or failure occurs over a large area or if total collapse occurs.
MAIN FEATURES
* Large strain simulation of continua, with optional interfaces
* Explicit solution scheme, giving a stable solution to unstable physical processes
* Library of constitutive models
* Statistical distribution of any property
* Structural elements (including non-linear cables), with general coupling to the continuum, shell elements in FLAC3D
* Built-in language to add user defined features (FISH)
* Groundwater flow with full coupling to mechanical calculations.
OPTION
* Dynamic Analysis - allows modeling of the full dynamic response of a system to be simulated in the time domain
* Thermal Analysis - allows the simulationof transient heat conduction in materials and the development of thermally induced displacement and stress
* Creep Analysis - can be used to simulate the behavior of materials that exhibit creep, that is, time-dependent material behavior.
NEW FEATURES
Full Graphics Interface - new graphical interface, the (Graphical Interface for Itasca Codes), makes all features in available by using graphical tools. (The command-line input is still available.) New features in the include: a grid library that helps users create common types of geo-engineering grids (e.g., retaining walls, slopes, tunnels, dams); use of digitized plots or imported graphics files to guide the grid generation graphically; and access to a database of material properties.
All commands that are available to users in previous versions of FLAC are now accessible via menu- and mouse-driven operations in the GIIC. The command-line output of the code is available for viewing via a pane in the GIIC. Through the use of multi-paned windows that may be re-sized or minimized, users can customize the modeling environment to match their individual needs and preferences.
The GIIC is a JAVA-based application that runs independently of the modeling code; data are exchanged directly between FLAC and the GIIC, allowing the user to obtain and manipulate model results without interfering with the solution process. Eventually, all Itasca codes will accessible with the GIIC.
Double-Precision Arithmetic Version - Version 4.0 includes a double-precision executable code as well as a single-precision code. The double-precision version provides more accurate solutions for cases in which the accumulated value of a variable after many thousands of timesteps is much larger than the incremental change in the variable (e.g., an accumulated value for displacement that is roughly six orders of magnitude larger than the incremental value in a creep calculation). The double-precision version is also recommended for models with grids containing zones with coordinates that are large compared to typical zone dimensions.
Two-Phase Flow and Capillary Effects - Available as a new optional feature, Version 4.0 can perform fluid flow and fully coupled simulations in which two immiscible fluids (with optional capillary pressure) are present within a porous medium. Two-phase flow processes and capillary effects have important applications in fields as diverse as the oil industry (gas drive), agriculture (flow in the vadose zone), pollution control, radioactive waste disposal and slope stability. In the FLAC formulation, the two fluids are considered slightly compressible (i.e. spatial variations of densities are neglected). The capillary pressure and relative permeability laws are built-in functions of the van Genuchten form. The non-linear partial differential equations for two-phase flow are solved using an explicit finite difference scheme with upstream weighting technique. The mechanical coupling uses Bishops effective stresses, and solid grains are assumed to be incompressible, as in previous FLAC versions.
Ability to link to other Itasca codes via TCP/IP connection - Data can be passed rapidly between two or more Itasca codes running on the same machine or on separate machines with a network connection. The upcoming versions of PFC and FLAC3D also allow such coupling, and the same facility will exist in new versions of other codes, as they become available. One example application involves embedding a PFC particle assembly within a FLAC grid, thus providing an efficient continuum boundary condition for the PFC assembly. The data transmission between codes is invoked by FISH functions that allow large arrays of data to be exchanged with single function calls.
New Printing and Movie Facilities - Version 4.0 can generate graphics files in several industry standard formats: BMP, EMF, JPEG, DXF and PCX in addition to PostScript. These formats are invoked through the SET plot command. Also, a new movie viewer program (MOVIE.EXE) is provided as a Windows application. The MOVIE command now works with the Windows version of FLAC and controls the capture of screen plots as a set of PCX images that are viewed with MOVIE.EXE.
لینک دانلود:
http://rapidshare.com/files/13520247...5-LND.zip.html
پاسخ : دانلود نرم افزارهای شاخه مهندسی ژئوتکنیک