دانلود نرم افزارهای مرتبط با طراحی پل ها

[M@hdi42]

ز این پس جهت نظم دهی بهتر بخش دانلود نرم افزار و دسترسی بهتر همراه با دسته بندی مناسب آنها نرم افزارهای مرتبط به طراحی پلها در این تاپیک قرار داده میشود
البته قبل از این تاریخ نرم افزارهای دیگری در این زمینه در سایت قرار داده شده است که این تاپیک شامل آنها نخواهد بود. از دوستان نیز تقاضا میشود که نرم افزارهای طراحی پل و مرتبط با طراحی پل را فقط در همین تاپیک برای دانلود معرفی نمایند
برخی از تاپیکهای مرتبط ( و البته نه تمام آنها ) که قبلاً ایجاد شده اند به آدرس های زیر میباشند:

نرم افزار FB-Pier V.3
http://iransaze.com/ftopicp-69767-bridge.html#69767

دانلود نرم افزار طراحی پل ADAPT-ABI v5 Bridge Design
http://iransaze.com/ftopicp-69626.html#69626

دانلود 437 برنامه مهندسی عمران در شاخه های مختلف تحت اکسل ( بخشی شامل نرم افزارهای طراحی پل )
http://iransaze.com/ftopicp-69087.html#69087

دانلود جدید ترین ورژن pca cloumn
http://iransaze.com/ftopicp-69077.html#69077

Midas Civil 2009
http://iransaze.com/ftopicp-56289-bridge.html#56289

دانلود مجموعه متنوعی از نرم افزارهای مهندسی عمران ، معماری و نقشه برداری (بخشی شامل نرم افزارهای طراحی پل )
http://iransaze.com/ftopicp-54601-bridge.html#54601
شامل بخشهای زیر :

RM2004.Space.Frame4D.9.04.02
http://rapidshare.com/files/280079326/RM2004.Space.Frame4D.9.04.02_www.elme-omran.com.rar
RM2004.Space.Frame.9.02.02
http://rapidshare.com/files/280095508/RM2004.Space.Frame.9.02.02_www.elme-omran.com.rar
West.Point.Bridge.Designer.2006
http://rapidshare.com/files/280097582/West.Point.Bridge.Designer.2006_www.elme-omran.com.rar
پسورد برای نرم افزاراهای بالا : www.elme-omran.com (http://www.elme-omran.com)
دانلود نرم افزار lusas 13.6
http://iransaze.com/ftopicp-10862-bridge.html#10862

Imbsen XTRACT v3.0.3 - Tool for Analysis of Structural Cross Sections
http://iransaze.com/ftopicp-2659-bridge.html#2659

PGSplice v0.6.3
http://iransaze.com/ftopicp-2092-bridge.html#2092

[M@hdi42]

دانلود نرم افزار طراحی پل PENTAGON-Bridge

توضیحات:
PENTAGON-Bridge has comprehensive analysis facilities to design all types of bridge design from simple grillages to complex cable stayed and suspension bridges. PENTAGON-Bridge searches the worst position and the worst combination of loads for specified variables such as moment, shear, stress, support reaction etc at a given location in a bridge deck or a structure using the influence line, the influence surface, the envelope of maximum/minimum values of such variables.

PENTAGON-Bridge has been developed specifically for the bridge analysis based on the powerful 3D finite element technology. PENTAGON-Bridge has its technical foundation on the famous, general-purpose FE program, PENTAGON-3D. PENTAGON-Bridge will meet your analysis needs and reduce your modeling efforts, greatly.

PENTAGON-Bridge covers any of the following special features for the most cost-effective analysis of bridges.

*

Influence line : produces the influence line along the path of moving loads
*

Influence surface : produces the influence contour over the area passed by moving loads
*

Bridge Envelope : produces the maximum and minimum values of the specified parameter (moment, shear, stress, support reaction etc) for all elements.
*

Bridge Target : traces the target load condition to make the specified member forces at a location. For example, this traces the load condition to make the minimum (negative) moment at a internal support of bridge.
*

Eigenvalue problems (see an Arch bridge example)
*

Earthquake spectrum analysis by SRSS and CQC method
*

Ground motion analysis
*

Time history analysis for the dynamic loads
*

Dynamic analysis for the moving loads by simple input of moving velocity and/or (roughness + vehicle model)

Besides the above capabilities, PENTAGON-Bridge extends its application to :

*

Geometric nonlinearity for truss and frame structures
*

Material nonlinearity for truss, spring and solid elements
*

Staged construction
*

Solid modeling for ground-structure interaction
*

Stop and restart function
*

Result combination between the load cases, the load stages, the bridge envelopes and the bridge targets

PENTAGON-Bridge is the Windows based program on Windows 95, Windows 98, Windows NT and Windows2000. The mesh generation is easily accomplished by several mouse clicks and other analysis information is input in full GUI environment. With the powerful OpenGL functions (the graphic library), the analysis results are presented in the beautiful 3D graphics.

لینک دانلود:
در صفحه مورد نظر هم خود برنامه و هم منوال و مثال های طراحی را دانلود کنید
http://www.femsoft.com/daeyjung/frpen/downpbr.html

[M@hdi42]

دانلود نرم افزار FB-MultiPier v3



http://bsi-web.ce.ufl.edu/products/screenshots/3DModel.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید







http://bsi-web.ce.ufl.edu/products/screenshots/Wizard.jpg










http://bsi-web.ce.ufl.edu/products/screenshots/Displacement.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید





توضیحات:
The FB-MultiPier analysis program is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans. The full structure can be subject to a full array AASHTO load types in a static analysis or time varying load functions in a dynamic analysis. Each pier structure is composed of pier columns and cap supported on a pile cap and piles/shafts with nonlinear soil. This analysis program couples nonlinear structural finite element analysis with nonlinear static soil models for axial, lateral and torsional soil behavior to provide a robust system of analysis for coupled bridge pier structures and foundation systems. FB-MultiPier performs the generation of the finite element model internally given the geometric definition of the structure and foundation system as input graphically by the designer. This allows the engineer to work directly with the design parameters and lessens the bookkeeping necessary to create and interpret a model.

لینک دانلود:
http://www.4shared.com/file/5oAfgA1D/PIER.htm

[M@hdi42]

TDV RM 2004
منبع (http://www.civilstars.com/Thread-TDV-RM-2004)
و
http://forum.civilea.com/Thread-tdv-rm-2004
نرم افزار طراحی پل

سایت شرکت سازنده http://www.tdv-consulting.at/index.php

لینک دانلود:
http://www.4shared.com/file/149042763/47d97188/TDV_RM_2004_V9-11503.html
http://hotfile.com/dl/133080524/a8b0d12/TDV_RM_2004_V9-11503.zip.html
TDV RM 2006

Size: 171 MB

TDV RM 2006 install files only!
http://www.4shared.com/account/file/258106808/6fe39d66/200695901.html

مراحل نصب:
1) run setup.exe 0n folder : TDV_RM2004 V9.15.03 to install

2) after install, go to cracck folder, copy "gp9.exe" and "rm9.exe" from "\LEGEND"
dir into C;/Program files/Tdv2000/rm9.15.03, overwrite when prompted

3) go to folder : Basewin V2.15.01 and run setup.exe

[M@hdi42]

PGSuper v2.0.2
منبع (http://www.civilstars.com/Thread-PGSuper-v2-0-2)



http://www.img.upnload.com/images/3vzrl4199kf9nekykzd.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




Win | English | .rar | 20 mb

PGSuper™ is Precast-Prestressed Girder design and analysis software. PGSuper™ can be used to design and check precast-prestressed girder bridges in accordance with the AASHTO LRFD Bridge Design Specification and/or WSDOT criteria. The flexural design feature computes the number and configuration of prestressing strands and the minimum required concrete release strength. The shear design feature determines the number, size, and spacing of transverse reinforcement for vertical shear, horizontal shear, bursting, and strand confinement. Specification checking evaluates girders for compliance with strength, service, and detailing criteria. Girders are evaluated for stresses and stability during handling and transportation. Temporary prestressing to control camber, improve stability, and reduce concrete release strengths may also be input. The capabilities and constraints of local fabricators have been accounted for in this software product. PGSuper™ has been designed to allow for future expansion and updating as design criteria and user expectations change.

لینک دانلود:
http://rapidshare.com/files/60047288/PGSuper_2.0.2.part1.rar
http://rapidshare.com/files/60052876/PGSuper_2.0.2.part2.rar
http://rapidshare.com/files/60061928/PGSuper_2.0.2.part3.rar
http://rapidshare.com/files/60066619/PGSuper_2.0.2.part4.rar
http://rapidshare.com/files/60070681/PGSuper_2.0.2.part5.rar

[M@hdi42]

برنامه طراحی پل Sam Leap 5
منبع (http://www.civilstars.com/Thread-%D8%A8%D8%B1%D9%86%D8%A7%D9%85%D9%87-%D8%B7%D8%B1%D8%A7%D8%AD%DB%8C-%D9%BE%D9%84-Sam-Leap-5)
و
http://forum.civilea.com/Thread-sam-leap-5

SAM-LEAP5's section design modules allow you to define sections of any shape,
apply moments, axial forces and shears and then determine the section properties,
stresses and strains.

SAM-LEAP5's beam design modules allow you to define and design steel concrete
composite beams, precast prestressed beams, reinforced concrete beams
and post-tensioned concrete beams.

SAM-LEAP5's analysis modules model a wide range of bridge structures from line beams,
through offset grillages to plate finite element models.
Integration with the section and beam modules leads to a very rapid design cycle.

لینک دانلود:
http://rapidshare.com/files/307573749/SamL5.part1.rar
http://rapidshare.com/files/307063050/SamL5.part2.rar
Mirror with crack
http://hotfile.com/dl/132992843/e3d4426/SamLeap5.part1.rar.html
http://hotfile.com/dl/132992852/b3d7558/SamLeap5.part2.rar.html

[M@hdi42]

نرم افزار UT Bridge
Analysis of bridge erection and concrete deck placement

PURPOSE: UT Bridge is a PC based user-friendly 3-D finite element analysis program that analyzes straight or curved I-girder bridges during girder erection and concrete deck placement. The program uses information readily available to the practicing engineer and develops a robust model to predict the behavior of these bridges providing the user with displacements, stresses, and rotations.

لینک دانلود:
http://www.4shared.com/file/gSghsQ5F/UT_Bridge.html
منبع (http://www.civilstars.com/Thread-%D9%86%D8%B1%D9%85-%D8%A7%D9%81%D8%B2%D8%A7%D8%B1-UT-Bridge)

[M@hdi42]

Csi Bridge V15
http://forum.civilea.com/showthread.php?tid=18073&pid=52122#pid52122
Here CSI Bridge without med
http://www.fileserve.com/list/ZZZW92N
CSiBridgeV1500StandAlone.zip.001 100.00 MB
CSiBridgeV1500StandAlone.zip.002 100.00 MB
CSiBridgeV1500StandAlone.zip.003 100.00 MB
CSiBridgeV1500StandAlone.zip.004 100.00 MB
CSiBridgeV1500StandAlone.zip.005 100.00 MB
CSiBridgeV1500StandAlone.zip.006 23.39 MB
Total file size: 523.39 MB
Significant enhancements included in CSiBridge v15.0.1:

* A new option has been added for the modeling of I-girders in composite steel-girder superstructure sections. In addition to the existing options to model the I-girders as frame objects or as area objects (for both web and flanges), the girders can now be modeled using area objects for the webs and frame objects for the flanges.

* A new bridge seismic design check has been added to the Chinese version that follows the Chinese code JTG/T B02-01-2008, "Guidelines for Seismic Design of Highway Bridges".

* Bridge design for prestressed concrete box girder superstructures using Chinese code “JTG-D62-2004” in the Chinese version has been updated as follows: (1) The effect of existing longitudinal rebar is now accounted for in flexural design. (2) A new design check has been added for tendon stress.

* The Chinese 2002 building design codes are available for concrete and steel frame design in the Chinese version.

* Concrete frame design has been enhanced to improve the smoothing of P-M-M interaction surfaces in those rare cases where they become non-convex due to kinks in the P-M curves.
Mirror link for SapBridge V15
http://www.mediafire.com/?fgyq8drzgdawo
Size: 523,79 MB
miror links
megaupload

http://www.megaupload.com/?d=C0B1UN5S

depositefiles

http://depositfiles.com/en/files/ftqndg095

direct from multiupload

http://www.multiupload.com/ZEGU3C5FLS
اطلاعات بيشتر در مورد نرم افزار :
http://iransaze.com/ftopicp-96879.html#96879

[M@hdi42]

WinSEISAB v5.0.7 (Seismic Analysis of Bridges)
http://forum.civilea.com/showthread.php?tid=1823&pid=55464#pid55464
Program Overview

WinSEISAB (Windows SEISmic Analysis of Bridges) is a computer program specifically developed for the seismic analysis of bridges. The overall objectives in developing WinSEISAB were to provide the practicing bridge engineer with a usable design tool and a vehicle for implementing the latest seismic design methodologies into the bridge engineering profession.

WinSEISAB contains the Uniform Load (AASHTO Procedure 1), the Single Mode Spectral Analysis (AASHTO Procedure 2) and Multimode, i.e., response spectrum, Spectral Analysis (AASHTO Procedure 3) methods included in the current AASHTO Standard Specifications for Highway Bridges, Division IA [1], which adopted the “Guide Specifications for Seismic Design of Highway Bridges” [10] in 1990. The Guide Specifications are based on the ATC report: “Seismic Design Guidelines for Highway Bridges” [2]. Consequently, the AASHTO response spectra used in WinSEISAB correspond to those that were previously identified as ‘ATC-6.’

WinSEISAB can be used to analyze simply supported or continuous deck girder-type bridges with no practical limitation on the number of spans or the number of columns at a bent. In addition, earthquake restrainer units may be placed between adjacent structural segments. Horizontal alignments composed of a combination of tangent and curved segments are easily described using alignment data taken directly from roadway plans. Connections between the superstructure and the substructure and between adjacent superstructure segments at span hinges can be specified with either a keyword force release or by using bearing elements on a point-by-point basis. The flexibility of the soil and foundations at the abutments and column bottoms is easily included using stiffness coefficients or individual piles grouped into pile footings.

WinSEISAB has generating capabilities that will, with a minimum amount of input data, automatically build a model consistent with the modeling techniques currently being used to conduct dynamic analyses. Seismic loadings in the form of acceleration response spectra are stored within WinSEISAB and may be easily referenced by the user, or a site-specific spectrum can be utilized. WinSEISAB can perform a static analysis in which dead load forces are generated using structure mass, but WinSEISAB does not perform a combination of dead load and seismic forces.



http://pic.civilea.com/images/90368861849433879387.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




http://www.mediafire.com/file/ubsz00w65muiunx/winseisab_5_0_7.rar
http://www.duckload.com/download/3039450/WinSEISAB_5.0.7.rar
http://www.filesonic.com/file/101401562/winseisab_5_0_7.rar
http://www.fileserve.com/file/T7QjCjq/winseisab_5_0_7.rar
http://www.shragle.com/files/39fc778a/winseisab_5_0_7.rar
http://uploading.com/files/fb4e66a1/WinSEISAB_5.0.7.rar/
http://ifile.it/rv9blx4/winseisab_5_0_7.rar
4shared|depostefiles|hotfile|rapidshare|filefactor y|uploaded.to:
http://www.interupload.com/files/1O12UDQY/winseisab_5_0_7.rar_links

[M@hdi42]

Imbsen Winbds
http://forum.civilea.com/showthread.php?tid=19329&pid=55661#pid55661
WinBDS analyzes or designs orthogonal bridge frames and is applicable to the majority of concrete bridges being designed today.

CROSS SECTIONS may by specified by using a predefined, standard box girder superstructure shape or by adding or subtracting geometrical parts using predefined part codes.

LIVE LOADS can be automatically generated for the AASHTO HS20-44 and the California P13 truck by simply giving the number of live loads lanes may be applied to the structure by describing the axle loads, distance between axles and number of live load lanes. Uniform lane loads can be defined with moment and shear riders. Other automatically generated live loads include the Cooper Loading and a user defined vehicle of up to 97 axles.

PRESTRESSED CONCRETE analysis and design capabilities include: Continuous prestress, Simple span prestress, Segmental prestress, 100 prestress cable paths per frame, 3D cable friction losses, Primary and Secondary effects, Cross-section analysis, Ultimate capacity check, AASHTO shear requirements, Tendon elongations, and calculation of AASHTO long-term losses.

OUTPUT results are organized in the same order as the input data. All input data is echoed in the output reports. Output reports include section properties, dead load and additional fixed loads results, live load force envelopes, prestress results including required P-Jack, mild steel requirements, and shear design stirrup requirements. Additional reports are generated for the Rating Subsystem and Prestresed Precast Girder Subsystem.

GRAPHICAL DISPLAY of moment and shear envelopes are available after an analysis has been performed. Additional plots are available for deflections, top and bottom fiber stresses, prestress force, prestress cable path and influence lines. These plots can be displayed for all spans in the bridge or for an individual span or for any sequential list of spans. Where applicable, the plots include the different trials that are available, such as: dead load, added dead load, live load no. 1 (both negative and positive envelopes), prestress, etc. These loads can be plotted individually or combined into one load case.





http://pic.civilea.com/images/99983623458234317712.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید







http://pic.civilea.com/images/73283806250691038658.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




http://www.4shared.com/file/kRuQ_tx5/wnbds.html
password:
_always4civilEa_
Mirror Links:
RAR 11.50 MB
http://www.duckload.com/download/3131531/WinBDS_5.0.3.rar
http://www.filesonic.com/file/108405281/WinBDS_5.0.3.rar
http://www.fileserve.com/file/ftYtuRH/WinBDS_5.0.3.rar
http://www.shragle.com/files/b444ac06/WinBDS_5.0.3.rar
http://uploading.com/files/6m22mmde/WinBDS_5.0.3.rar/
http://ifile.it/3wtjlcb/WinBDS_5.0.3.rar
4shared|depostefiles|hotfile|rapidshare|easy-share|filefactory|uploaded.to:
http://www.interupload.com/files/10KDUUHJ/WinBDS_5.0.3.rar_links
Installation notes: Copy file "iai.key" into WinBDS folder.

[M@hdi42]

Oasys Adsec v.8.0.3.6
http://forum.civilea.com/Thread-oasys-adsec-v-8-0-3-6
Do you need to analyse a bridge beam for cracking under load? Or perhaps pre-stress a precast slab? Check the capacity of a pile? How about adding carbon fibre sheets to an existing concrete section to increase the strength? Or maybe design a composite mega column? Find out the stiffness and capacity of a stair core? AdSec can do all this and more.

AdSec is an analysis program for sections under load. It was originally developed for analysis of reinforced concrete sections but can now look at concrete, steel or fibre reinforced polymer (FRP) sections, plus sections composed of any combinations of these materials.
Analysis options are available for serviceability and ultimate limit states in accordance with a wide range of international design codes, whether for uniaxial or biaxial conditions.
Simplified parametric input of geometry and reinforcement layout is available for regular shaped column and beam sections. Tools allow these simple sections to be assembled into more complex (compound) sections.


Analyse the following load types:

* Axial loads and bending moments
* Prestress using bonded and unbonded tendons
* Differential shrinkage and temperature effects
* Nominal eccentricity moments
* Combine long-term dead loads with short-term imposed
* Derive forces and moments from strains and curvatures
http://rapidshare.com/files/137510355/OAdsec8.0_www.softarchive.net.rar

The recent version is given here. However, i am really failed to install the earlier given in POST 1. The recent version is for 30 day trial period. I request forum members especially BennyP to guide us to make medicine or get trial period extension. By the way the my antivirus (Norton) shows the SONAR contained in the medicine given in above.
http://www.4shared.com/account/file/qCz03xu1/Oasys_AdSec_8_2_0_29.html
Uninstall the program and run this Trial Renew in root of your system partition (C:\).
http://hotfile.com/dl/115743221/3b00ad2/ads82.rar.html
The RAR Password is: ForCivilEA
OASYS STRUCTURAL (Include ADSEC):
http://www.4shared.com/file/MUfOnxZT/Oasys_Structural_Software.html
Password : FromCivilea

Crack From Inqbus:
http://www.4shared.com/file/8-5-uuM_/Oasys_Geotechnical_Software_cr.html

http://www.gigasize.com/get.php?d=1c4fmxn6dvf

[M@hdi42]

TDV RM 2006 9.59.01
http://forum.civilea.com/Thread-bentely-rm-bridge-tdv--19615
NO MEDICINE , ONLY INSTALATION FILES

http://www.bentley.com/en-US/Products/RM+Bridge/



http://pic.civilea.com/images/37580269743351926198.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




http://rapidshare.com/files/319382682/RM2006_v9.59.01.zip
you should install BASEWIN to run this proggy
http://rapidshare.com/files/407425119/Base2.55.01.zip
The RM Bridge V8i Prerequisite Pack(BaseWin) could be downloaded @:
ftp://64.90.235.41/pub/help/rmbridge/08096004en/readme.htm
(needs register!)
New link for basewin 2.55.01
http://www.mediafire.com/?cxzc4b7aee1lnb4
http://www.mediafire.com/?pjhhxbh04nz26id
PASSWORD:
civilea
HOTFILE MIRROR
http://hotfile.com/dl/126999270/d43f593/basewin.2.55.01.part1.rar.html
http://hotfile.com/dl/126999277/be4d344/basewin.2.55.01.part2.rar.html

[M@hdi42]

LEAPSOFT RC-PIER
http://forum.civilea.com/Thread-leapsoft-rc-pier



http://pic.civilea.net/images/06159315158522881776.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




RC-PIER ® is an integrated tool for the AASHTO Standard and LRFD analysis and design of reinforced concrete bridge substructures and foundations. RC-PIER ® makes the transition to LRFD simple and efficient by incorporating both LFD and LRFD specifications in a single interface. Analysis results are presented in a variety of easy-to-view formats.



http://pic.civilea.net/images/59018312156053949619.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




http://www.mediafire.com/?njmyunyznm2
More information about this program could be found at:
http://www.leapsoft.com/index.php?section=showProduct&product=3&productName=RC-
And a short Brochure (2 pages) at:
http://www.leapsoft.com/documents/pdf/brochures/RC-PIER_TS_7_1.pdf
More information about this program could be found at:
http://www.leapsoft.com/index.php?section=showProduct&product=3&productName=RC-
And a short Brochure (2 pages) at:
http://www.leapsoft.com/documents/pdf/brochures/RC-PIER_TS_7_1.pdf
http://hotfile.com/dl/127394866/cf396f6/LS_RCPR_V7.0.0.rar.html

[M@hdi42]

CSIBridge v15.1.0
http://forum.civilea.com/Thread-csibridge-v15-1-0
Significant New Features

- Built-in European concrete and steel material properties.
- Display and output of frame stresses.
- Load optimization feature to determine the optimal loading scale factors to achieve goals and limits on displacement and force response throughout the structure.
- Canadian NBCC 2010 loading for wind, seismic, and response-spectrum.
- American ASCE-7 loading for wind, seismic, and response-spectrum.
- Italian NTC 2008 response-spectrum functions with geographic database.
- Specialized bridge groups may now be specified within each bridge object. Each bridge group applies to a particular type of component (slab, girder, bearing, etc.) and an individual bridge object. Depending on the bridge group type, groups may be defined for multiple items, multiple longitudinal ranges, and/or multiple transverse ranges.
- The specification of rebar for the bridge object superstructure has been enhanced. Distances are now measured along each individual girder. Longitudinal rebar is located relative to the center of the supports or the centers of the girder spans, and shear rebar is located relative to the ends of each girder span.
- A new design request type has been added for steel I-girder composite bridge superstructures to account for the constructability check according to the "AASHTO LRFD 2007" code, including the 2008 interim provisions. Composite and non-composite behavior can both be considered, with or without using staged-construction analysis.
- Bridge load rating has been added for steel I-girder composite bridge superstructures according to the AASHTO "Manual for Bridge Evaluation", First Edition, 2008. Separate rating requests are provided for the service and strength checks of both composite and non-composite superstructures. Live-load distribution factors can be automatically calculated using code formulae, specified by the user, or determined from a detailed 3-D live-load analysis.
- For flexural-strength superstructure design checks by the AASHTO LRFD 2007 code, the effect of user-specified reinforcement is now included for the prestressed box-girder and precast-girder composite sections. Previously only the effect of the concrete and tendons were included in these checks. The effect of reinforcement for the slab of steel-girder composite sections was already being considered.
- Design checking has been implemented for concrete superstructure sections according to the Canadian "CAN/CSA-S6-06" code. Superstructure types supported include prestressed concrete box girders and composite sections with precast I-girders and U-girders. Separate design checks are provided for stress, flexural strength, and shear strength using MCFT (modified compression field theory). The effect of mild reinforcing is included as well as the prestress tendons. Live-load distribution factors can be automatically calculated using code formulae, specified by the user, or determined from detailed 3-D live-load analysis.
- Automated load combinations and design load types have been added as required for bridge design according to the Canadian code CSA-S6-06.
- Canadian steel frame building design code CSA S16-2009.
- Other minor enhancements.
Link download
http://www.fileserve.com/list/hXqWdqQ
Soft Joint file: http://www.ziddu.com/download/12225090/FSJSetup.exe.html
Mirror Links: 6@105.1 MB
Enterupload
Code:
http://www.enterupload.com/shsi56c5dr9x/CSiBridgeV1510StandAlone.zip.001.html
http://www.enterupload.com/bbx5awqoc4p8/CSiBridgeV1510StandAlone.zip.002.html
http://www.enterupload.com/914bsoqqiist/CSiBridgeV1510StandAlone.zip.003.html
http://www.enterupload.com/mbto91mkogke/CSiBridgeV1510StandAlone.zip.004.html
http://www.enterupload.com/cxd036vlhx47/CSiBridgeV1510StandAlone.zip.005.html
http://www.enterupload.com/ymcxda3li691/CSiBridgeV1510StandAlone.zip.006.html
Filesonic
Code:
http://www.filesonic.com/file/1434934181/CSiBridgeV1510StandAlone.zip.001
http://www.filesonic.com/file/1434948461/CSiBridgeV1510StandAlone.zip.002
http://www.filesonic.com/file/1434934301/CSiBridgeV1510StandAlone.zip.003
http://www.filesonic.com/file/1434934141/CSiBridgeV1510StandAlone.zip.004
http://www.filesonic.com/file/1434931191/CSiBridgeV1510StandAlone.zip.005
http://www.filesonic.com/file/1434934321/CSiBridgeV1510StandAlone.zip.006
Fileserve
Code:
http://www.fileserve.com/file/uxvbMuG/CSiBridgeV1510StandAlone.zip.001
http://www.fileserve.com/file/JXAJ6vM/CSiBridgeV1510StandAlone.zip.002
http://www.fileserve.com/file/NMaEXf7/CSiBridgeV1510StandAlone.zip.003
http://www.fileserve.com/file/TtBcNwM/CSiBridgeV1510StandAlone.zip.004
http://www.fileserve.com/file/8vKEZwf/CSiBridgeV1510StandAlone.zip.005
http://www.fileserve.com/file/KYRSvNe/CSiBridgeV1510StandAlone.zip.006
Bufiles
Code:
http://www.bufiles.com/8jawpgaa41oq.html
http://www.bufiles.com/kpk6tf7pquvk.html
http://www.bufiles.com/453o4docrrcb.html
http://www.bufiles.com/d0azsceqw6l5.html
http://www.bufiles.com/0atcruuxucxa.html
http://www.bufiles.com/a5vqwtlos1q4.html
Cramit
Code:
http://cramit.in/zg41khrdw0y1
http://cramit.in/ygimrjoxqgbf
http://cramit.in/hljafe3p9d53
http://cramit.in/81owy6ehep6k
http://cramit.in/ltxcmjbqo45c
http://cramit.in/5a1jyzmuytm6
Notes: Use previous CSI License Generator (Latest Update)
Download and use 7zip (free):

Code:
http://www.7-zip.org/

http://hotfile.com/dl/127297181/0f504bd/CSiBridgeV1510StandAlone.zip.001.html
http://hotfile.com/dl/127295307/2b5b168/CSiBridgeV1510StandAlone.zip.002.html
http://hotfile.com/dl/127297143/123c5b2/CSiBridgeV1510StandAlone.zip.003.html
http://hotfile.com/dl/127295360/e478099/CSiBridgeV1510StandAlone.zip.004.html
http://hotfile.com/dl/127295079/e513b99/CSiBridgeV1510StandAlone.zip.005.html
http://hotfile.com/dl/127295388/456544a/CSiBridgeV1510StandAlone.zip.006.html

Here it is the direct link:
ftp://bridgestandalone:CZesc10w@csidownloads.com/CSiBridgeV1510StandAlone.zip

Stand alone V15.0.1 patch from V15.00
ZIP 46.65 MB
http://www.enterupload.com/lnqkx7vhvd9k/CSiBridgeV1501StandAlonePatchFromV1500.zip.html
http://www.filesonic.com/file/1722257881/CSiBridgeV1501StandAlonePatchFromV1500.zip
http://www.fileserve.com/file/pewVhXZ/CSiBridgeV1501StandAlonePatchFromV1500.zip
http://ifile.it/ar8suh6/CSiBridgeV1501StandAlonePatchFromV1500.zip
http://www.mediafire.com/?gseu67dv52ehc6e
http://www.megaupload.com/?d=R6U5LH8P
http://cramit.in/2ait6z46jf0k

Single ZIP file: Stand Alone V15.10
ZIP 631 MB
http://www.enterupload.com/3xfhkwfg28y5/CSiBridgeV1510StandAlone.zip.html
http://www.filesonic.com/file/1722335231/CSiBridgeV1510StandAlone.zip
http://www.2shared.com/file/8vt2Eiyh/CSiBridgeV1510StandAlone.html
http://www.megaupload.com/?d=PH03K4W7
http://cramit.in/7qrvmj823vod
CSIBridge v15.1.0 Full DVD (1.61 GB)
http://www.fileserve.com/list/admUmgJ

[M@hdi42]

LimitState RING v3.0.b.11817
http://forum.civilea.com/Thread-limitstate-ring-v3-0
Size: 76.3 MB



http://pic.civilea.net/images/35350255389881806578.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




LimitState:RING 3.0 is the latest version of the highly successful RING software for the analysis of masonry arch bridges.

Modern, intuitive user interface
Multi-ring, multi-span analysis (no need to balance thrusts)
Use a wide range of built-in and user-defined arch profiles
Include local defects such as mortar loss and weak masonry
Undertake support settlement analyses
View moment, shear and normal force diagrams
Allocate separate properties to nearsurface and deep fill
Model reinforcement


http://www.filesonic.com/file/1500758791/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar

http://www.fileserve.com/file/QpsQWgp/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar

http://www.wupload.com/file/64075653/LimitState.RING.v3.0.b.11817-RECOiL_share4progressivenes.softarchive.net.rar
working link:
http://www.filesonic.com/file/1500116231/LimitState.RING.v3.0.b.11817-RECOiL.rar
http://www.filebig.net/files/Py7sZgwgYx
http://file2web.com/332LimitState.RING.v3.0.b.11817-RECOiL.rar
http://www.2shared.com/file/hoVUhRLX/LimitStateRINGv30b11817-RECOiL.html
http://depositfiles.com/files/439kvs7vy
http://uploading.com/files/7e1b8263/LimitState.RING.v3.0.b.11817-RECOiL.rar/
http://www.enterupload.com/l66q9t6rjq9c/LimitState.RING.v3.0.b.11817-RECOiL.rar.html
http://hotfile.com/dl/134435323/a56b1c3/LimitState.RING.v3.0.b.11817-RECOiL.rar.html

[M@hdi42]

Midas Gen 2011 v2.1 (30 days TRIAL)
http://forum.civilea.com/Thread-midas-gen-2011-v2-1-30
Integrated Analysis and Design System for Buildings and General Structures.

For more information and requesting 30 days trial key:
www.midasuser.com (http://www.midasuser.com)



http://pic.civilea.net/images/52003296671588142930.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید







http://pic.civilea.net/images/16660774637847734989.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




Setup only (264mb):

http://ifile.it/uejg4yw/mg2011v21w.rar
or
http://www.megaupload.com/?d=Z6REG5AL
or
http://hotfile.com/dl/127518718/3a20062/mg2011v21w.rar.html
or
http://depositfiles.com/files/ebia4nwxx

Password:


کد:


+CivilEA+



August 2011 update for Midas Gen 2011 v2.1:
http://ifile.it/trocejd/mg2011v21upd.rar
or
http://www.mediafire.com/?m49as07cavvz4km
or
http://hotfile.com/dl/127695876/b42d2e0/mg2011v21upd.rar.html
or
http://depositfiles.com/files/r4jkmq0yw

Password:


کد:


+CivilEA+

[M@hdi42]

MIDAS SET V3.3.1 (WITHOUT CRACK)
http://forum.civilea.com/Thread-midas-set-v3-3-1



http://img191.imageshack.us/img191/8074/midasset.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




info:
MIDAS/Set is one of the MIDAS structural engineering programs and named after the initials of "Structural Engineer's Tools". It is a collection of handy structural component design tools, which are easy to use and speeds up the day-to-day design process
http://rapidshare.com/files/152934091/MIDAS_set.rar
MIDAS SET V3.3.1(WITHOUT CRACK)

SORRY FOR THAT, IF SOMEONE HAVE CRACK PLEASE SHARE IT.

THANK IN ADVANCE.

MIDAS SET V3.2.1 (WITH CRACK)

http://rapidshare.com/files/148037321/midas_set_3.2.1.rar
PLEASE READ IN README.TXT IN CRACK FOLDER

1) Install the program with the dongle drivers

2) If you have run the program in this session you have to restart windows

3) Patch the file C:\Program files\Midas\Set\ChoGa12.dll

4) Go to menu "Help"---> Register Protection key ...
and put this:

Key Number: 502E504F57455220
Key Type: Stand-alone

New links for MIDAS-SET 3.2.1 PORTABLE:
http://www.megaupload.com/?d=TQGFVYVT
4shared link of MIDAS SET V3.3.1 (WITHOUT CRACK)
http://www.4shared.com/file/4vShosNy/MIDAS_set.html

4shared link of MIDAS SET V3.2.1 (WITH CRACK)
http://www.4shared.com/file/LAB2R9Yp/midas_set_321.html
4shared link of MIDAS-SET 3.2.1 PORTABLE
http://www.4shared.com/file/3nQlkrOh/MIDASET321PORTABLE.html
MIDAS-SET 3.2.1 PORTABLE
http://hotfile.com/dl/127583235/6ceadb8/MIDASET321PORTABLE.zip.html

[M@hdi42]

Imbsen Winfad v5.0
http://forum.civilea.com/Thread-imbsen-winfad-v5-0
Imbsen Winfad v5.0

WinFAD is a computer program developed to assist the bridge engineer in designing or checking spread and pile concrete footings subjected to eccentrically applied axial loads that produce biaxial bending moments. Acceptable spread footing sizes and pile patterns are quickly and efficiently determined using WinFAD. After the engineer selects footing plan dimensions, WinFAD determines footing thickness and areas of reinforcing steel which satisfy design specification requirements. Individual loads are entered at the service level.

AASHTO LOAD GROUPS I THROUGH VI are included in the group combinations. Individual loads, input at the service level, are factored and combined in accordance with the AASHTO group combinations for Load Factor Design. Live loadings which produce maxima for each of the two bending moments and the axial load are further subdivided into 3 cases for Load Combination Groups, I, III, IV and VI.

SEISMIC DESIGN is in accordance with AASHTO Standard Specifications for Seismic Design of Highway Bridges or Caltrans Specifications for Group VII Loading.

ARBITRARY LOADS defined by the user are easily included in the family of loadings.

DESIGN RESULTS

WinFAD calculates the areas of reinforcing steel required based on the following criteria:

Satisfy crack control requirements
Moment produced by LFD or LRFD factored loads
Moment produced by Seismic loads
1.20 times cracking moment
1.33 times area required for analysis
0.75 times balanced reinforcement ratio
Maximum bar spacing of 18 inches
WinFAD checks bar spacing based on the following criteria:

Minimum AASHTO bar spacing
Preferred Caltrans minimum bar spacing
Maximum bar spacing of 18 inches
Inadequate development length




http://pic.civilea.net/images/46624430334067205525.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید







http://pic.civilea.net/images/46925887500614137607.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید







http://pic.civilea.net/images/73722756004583951380.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید





Installation+medicine:

http://www.4shared.com/file/BGCW_U_O/wnfd_v5.html

password:
4_*ForumcivilEA*
http://hotfile.com/dl/127241744/52bbe70/wnfd_v5.rar.html
password:
4_*ForumcivilEA*
http://www.enterupload.com/cdq1op3mk621/wnfd_v5.rar.html
http://www.filesonic.com/file/1707885511/wnfd_v5.rar
http://www.mediafire.com/?h0eac24rz394y9w
http://www.megaupload.com/?d=EI05ITE1
http://ifile.it/k09dqiv/wnfd_v5.rar
http://cramit.in/zadtt7ieuicj

[M@hdi42]

MIDAS/GEN Educational Version 3.5
http://forum.civilea.com/Thread-midas-gen-educational
Size: 9 MB

http://pic.civilea.net/images/43409885214485683049.jpg

midas Gen is a general-purpose structural analysis and optimal design system. The intuitive user Interface, contemporary computer graphics and powerful solver are some of the highlights of midas Gen. The user-oriented input/output features and a wide range of analysis capabilities enable practicing engineers and researchers to readily perform structural analysis and design for even complex and large structures. midas Gen utilizes the latest multi-frontal solver and analysis algorithms, which instantly generate accurate and practical analysis results. In addition, midas Gen provides design capabilities using various international standards producing optimal design solutions.

http://en.midasuser.com
http://hotfile.com/dl/134651469/72ccee7/MIDAS.ZIP.html
http://www.filesonic.com/file/3306812654/MIDAS.ZIP

[M@hdi42]

به نقل ازicivil
CSiBridge میتواند کلیه محاسبات پل را شامل مدل سازی، تجزیه و تحلیل و طراحی سازه را به راحتی برای شما انجام دهد CSiBridge برنامه همه کاره ترین و مولد ترین نرم افزار های موجود در بازار امروز.



http://www.icivil.ir/image/uploads/13616470951.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




با استفاده از CSiBridge، مهندسان به راحتی می توانند هندسه پل پیچیده، شرایط مرزی و موارد بار را تعریف کنند . پارامترهای تعریف شده مدل پل ، براسا استاندارهائی که مهندسان پل به آن آشنا هستند طراحی شده مانند خطوط طرح، دهانه، یاتاقان، اباتمنت، bents، لولا.
CSiBridge به طراح اجازه می دهد تا برای طراحی سریع و آسان و مقاوم سازی پل از فولاد و بتن استفاده نماید.طراح پارامتری اجازه می دهد تا کاربر مدل های ساده و یا پیچیده پل و یا تغییراتی ایجاد نماید وهمیشه طراح کنترل کامل بر روی فرایند طراحی. خطوط و وسایل نقلیه ، تعریف سرعت و اثرات عرض پل داشته باشد.
CSiBridge این نرم افزار قدرت تجزیه تحلیل شامل ، خزش ، تحلیل انقباض ، کابل کشش ، P-Delta ، تغییر مکانها ، تحلیل غیر خطی مواد ، کمانش را داراست
http://icivil.ir/short/?CSiBridge1
http://icivil.ir/short/?CSiBridge2
http://icivil.ir/short/?CSiBridge3
http://icivil.ir/short/?CSiBridge4

[M@hdi42]

دانلود نرم افزار تخصصي طراحي پل با CSiBridge V15.1
منبع (http://www.icivil.ir/omran/civil-software/cat-11/-csibridge-v151.php)
با معرفي و دانلود نرم افزار هم خانواده ايتبز كه مخصوص طراحي پل ها بصورت تخصصي ارائه شده است در خدمت شما عزيزان هستيم

CSiBridge میتواند کلیه محاسبات پل را شامل مدل سازی، تجزیه و تحلیل و طراحی سازه را به راحتی برای شما انجام دهد CSiBridge برنامه همه کاره ترین و مولد ترین نرم افزار های موجود در بازار امروز.



http://www.icivil.ir/image/uploads/13616470951.jpg


بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید




با استفاده از CSiBridge، مهندسان به راحتی می توانند هندسه پل پیچیده، شرایط مرزی و موارد بار را تعریف کنند . پارامترهای تعریف شده مدل پل ، براسا استاندارهائی که مهندسان پل به آن آشنا هستند طراحی شده مانند خطوط طرح، دهانه، یاتاقان، اباتمنت، bents، لولا.
CSiBridge به طراح اجازه می دهد تا برای طراحی سریع و آسان و مقاوم سازی پل از فولاد و بتن استفاده نماید.طراح پارامتری اجازه می دهد تا کاربر مدل های ساده و یا پیچیده پل و یا تغییراتی ایجاد نماید وهمیشه طراح کنترل کامل بر روی فرایند طراحی. خطوط و وسایل نقلیه ، تعریف سرعت و اثرات عرض پل داشته باشد.
CSiBridge این نرم افزار قدرت تجزیه تحلیل شامل ، خزش ، تحلیل انقباض ، کابل کشش ، P-Delta ، تغییر مکانها ، تحلیل غیر خطی مواد ، کمانش را داراست



براي راحتي دانلود اين نرم افزار در 4 پارت 165 مگابايتي براي شما آماده دانلود كرديم كه بايد هر 4 پارت را دانلود كرده و داخل يك پوشه قرار دهيد و سپس از حالت فشرده خارج كنيد . كرك هم همراه نرم افزار هست

دانلود نرم افزار تخصصي طراحي پل با CSiBridge پارت 1
http://icivil.ir/short/?CSiBridge1
دانلود نرم افزار تخصصي طراحي پل با CSiBridge پارت 2
http://icivil.ir/short/?CSiBridge2
دانلود نرم افزار تخصصي طراحي پل با CSiBridge پارت 3
http://icivil.ir/short/?CSiBridge3
دانلود نرم افزار تخصصي طراحي پل با CSiBridge پارت 4
http://icivil.ir/short/?CSiBridge4