ANSI/AISC 360-05 Specification for Structural Steel Buildings
Author: AISC | Size: 6.47 MB | Format: PDF | Publisher: AISC/ANSI | Year: 2005 | pages: 518
http://forum.civilea.com/Thread-ansi...-specification
The Specification for Structural Steel Buildings, hereafter referred to as the Specification, shall apply to the design of the structural steel system, where the steel elements are defined in the AISC Code of Standard Practice for Steel Buildings and Bridges, Section 2.1.
This Specification includes the Symbols, the Glossary, Chapters A through M, and Appendices 1 through 7. The Commentary and the User Notes interspersed throughout are not part of the Specification. This Specification sets forth criteria for the design, fabrication, and erection of structural steel buildings and other structures, where other structures are defined as those structures designed, fabricated, and erected in a manner similar to buildings, with building-like vertical and lateral load resisting elements. Where conditions are not covered by the Specification, designs are permitted to be based on tests or analysis, subject to the approval of the authority having jurisdiction. Alternate methods of analysis and design shall be permitted, provided such alternate methods or criteria are acceptable to the authority having jurisdiction.
1. Low-Seismic Applications
When the seismic response modification coefficient, R, (as specified in the applicable building code) is taken equal to or less than 3, the design, fabrication, and erection of structural-steel-framed buildings and other structures shall comply with this Specification.
2. High-Seismic Applications
When the seismic response modification coefficient, R, (as specified in the applicable building code) is taken greater than 3, the design, fabrication and erection of structural-steel-framed buildings and other structures shall comply with the requirements in the Seismic Provisions for Structural Steel Buildings (ANSI/AISC 341), in addition to the provisions of this Specification.
3. Nuclear Applications
The design of nuclear structures shall comply with the requirements of the Specification for the Design, Fabrication, and Erection of Steel Safety-Related Structures in Nuclear Facilities (ANSI/AISC N690) including Supplement No. 2 or the Load and Resistance Factor Design Specification for Steel Safety-Related Structures for Nuclear Facilities (ANSI/AISC N690L), in addition to the provisions of this Specification.
http://www.filesonic.com/file/144474..._Buildings.pdf
http://ifile.it/1rsicd9
http://www.4shared.com/document/ji-e...ecificati.html
